Ethernet switches HP ProCurve

  ProCurve Networking Switch 2510 Series overview

Physical characteristics
Dimensions: 7.9 x 6.3 x 5.0 in. (20.07 x 16.0 x 12.7 cm)
Weight: 5.55 lb. (2.5 kg )

Electrical characteristics

    * Voltage: 100:127 VAC/200:240 VAC
    * Maximum Current: 8.2A/3.8A
    * Frequency range: 50/60 Hz

Notes
For additional RPS specification information, see the data sheet for the product in which the RPS is being installed.

Recommended with:
HP ProCurve Switch 4204 vl chassis (J8770A)
and
24x gigabit port module (J8768A)

Management

    * Uni-Directional Link Detection (UDLD): monitors a link between two switches and blocks the ports on both ends of the link if the link goes down at any point between the two devices

Connectivity

    * ProCurve/IEEE Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports

Performance

    * Architecture: up to 76.8 Gbps crossbar switching fabric provides wire-speed intra- and inter-module switching with up to 48 million pps throughput built on ProCurve custom-designed ASIC technology

Resiliency and high availability

    * IEEE 802.3ad Link Aggregation Control Protocol (LACP) and ProCurve trunking: support up to 36 trunks, each with up to 8 links (ports) per trunk; trunking across modules is supported

    * IEEE 802.1s Multiple Spanning Tree Protocol: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol

    * Hot-swappable modules: permit modules and mini-GBICs to be added or swapped without interrupting the network

    * Optional redundant power supply: provides uninterrupted power; allows hot-swapping of one of the two supplies when installed

Layer 2 switching

    * VLAN support and tagging: supports the IEEE 802.1Q (4,096 VLAN IDs) and 256 VLANs simultaneously

    * GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs

Layer 3 routing

    * Basic IP routing: enables automatic routing to the connected VLANs and up to 16 static routes--including one default route--in IP networks

Security

    * Port security: allows access only to specified MAC addresses, which can be learned or specified by the administrator

    * MAC address lockout: prevents configured particular MAC addresses from connecting to the network

    * Multiple user authentication methods:
          o IEEE 802.1X industry-standard way of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server
          o Web-based authentication similar to IEEE 802.1X, provides a browser-based environment to authenticate clients that do not support the IEEE 802.1X supplicant
          o MAC-based authentication client is authenticated with the RADIUS server based on client's MAC address

    * Authentication flexibility:
          o Multiple IEEE 802.1X users per port provides authentication of up to 8 IEEE 802.1X users per port; prevents user "piggybacking" on another user's IEEE 802.1X authentication

    * Secure FTP: allows secure file transfer to/from the switch; protects against unwanted file downloads or unauthorized copying of switch configuration file

    * TACACS+: eases switch management security administration by using a password authentication server

    * Source-port filtering: allows only specified ports to communicate with each other

    * Secure Shell (SSHv2): encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks

    * Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch

    * Switch management logon security: can require either RADIUS or TACACS+ authentication for secure switch CLI logon

    * Custom banner: displays security policy when users log in to the switch

    * BPDU port protection: blocks Bridge Protocol Data Units (BPDU) on ports that do not require BPDUs, preventing forged BPDU attacks

    * Dynamic ARP protection: blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or data theft of network data

Convergence

    * IP multicast (data-driven IGMPv3): automatically prevents flooding of IP multicast traffic

    * IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol for easy mapping by network management applications

    * LLDP-MED (Media Endpoint Discovery): a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones

Quality of Service (QoS)

    * Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into 8 priority levels mapped to 4 queues

    * Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), L3 protocol, TCP/UDP port number, source port, and DiffServ

    * Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers

Manageability

    * sFlow (RFC 3176): wire-speed traffic accounting and monitoring

    * RMON and XRMON: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events

    * Friendly port names: allow assignment of descriptive names to ports

    * Dual flash images: provides independent primary and secondary OS files for backup while upgrading

    * Multiple configuration files: allows a config file to be stored to flash image

    * Stacking capability: single IP address management for a virtual stack of up to 16 switches, including the ProCurve 2500 series, 2510 series, 2600 series, 2800 series, 2810 series, 2900 series, 3400cl series, 3500yl series, 4200vl series, 6108, 6200yl-24G-mGBIC, and 6400cl series

    * Troubleshooting: ingress/egress port monitoring enables network problem-solving

    * Find-Fix-and-Inform: finds and fixes common network problems automatically, then informs administrator

    * Software updates: free downloads from the Web

ProCurve Switch vl 24-Port Gig-T Module:
with 24 RJ-45 10/100/1000-T ports

Ports:
24 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T; 802.3u Type 100Base-TX; 802.3ab Type 1000Base-T)
IEEE Auto-MDIX: Yes
Duplex: half or full  
Connector: RJ-45

Physical characteristics:
Dimensions: 8.97 x 8 x 1.75 in. (22.78 x 20.32 x 4.45 cm)
Weight: 1.23 lb. (0.56 kg )

Cabling:
Type:

1000Base-T: Category 5 (5E or better recommended), 100 ? differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000Base-T

Recommended with:
HP ProCurve Switch 4204 vl chassis (J8770A)
and
Redundant Power Supply (J4839A)

ProCurve Switch 2810 series
- 10/100/1000 stackable in both 24, 48-port design
- Secure, high performance connectivity along with advanced traffic
  monitoring and prioritization
- Shallow form factor ideal for smaller wiring closets

Connectivity:
Dual-personality functionality: four 10/100/1000 ports or SFP slots for optional fiber connectivity such as Gigabit-SX, -LX, -LH or 100-FX

Performance:
35.7 Mpps at 64 bytes (ProCurve 2810-24G) and 71.4 Mpps at 64 bytes (ProCurve Switch 2810-48G): ten times the bandwidth for low-latency throughput

  2910 series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack.

• High-performance Gigabit access switch
• Four optional 10-Gigabit ports (CX4 and/or SFP+)
• IEEE 802.3af/802.3at functionality (PoE/PoE+)
• Layer 2 plus static IP and RIP IP Routing
• Lifetime warranty, sFlow, ACLs, and rate limiting

 

ProCurve Switch 2810 series
- 10/100/1000 stackable in both 24, 48-port design
- Secure, high performance connectivity along with advanced traffic
  monitoring and prioritization
- Shallow form factor ideal for smaller wiring closets

Connectivity:
Dual-personality functionality: four 10/100/1000 ports or SFP slots for optional fiber connectivity such as Gigabit-SX, -LX, -LH or 100-FX

Performance:
35.7 Mpps at 64 bytes (ProCurve 2810-24G) and 71.4 Mpps at 64 bytes (ProCurve Switch 2810-48G): ten times the bandwidth for low-latency throughput