IBM

2GB PC3-10600 (1x2GB) Dual Rank CL9 ECC DDR3 1333MHz LP UDIMM (44T1569)

IBM 4-Gbps Optical Transceiver - SFP module (mini-GBIC), 1x Fiber Channel, Data Transfer Rate 4.24 Gbps Gigabit Ethernet

IBM eServer x306, 1x Intel Pentium 4, 3GHz, RAID

4GB PC3-10600 (1x4GB), Dual Rank CL9 ECC DDR3 1333MHz LP UDIMM (44T1571)

2GB PC3-10600 (1x 2GB) Single Rank CL9 ECC DDR3 1333MHz Chipkill LP RDIMM (44T1482)

IBM eServer x336, 1x Intel Xeon 3GHz, 512MB DDR, 1x 36,4GB, RAID

ServeRAID M1000 Series Advance Feature Key (46M0832)

4 GB (Single-Rank x4) PC3L-10600 CL9 ECC DDR3 1333 MHz LP RDIMM 49Y1424

IBM eServer x336, 1x Intel Xeon 3GHz, 1GB DDR, 2x 36,4GB, RAID

IBM 4GB PC3-10600 (1x4GB, 2Rx4, 1.5V) PC3-10600 CL9 ECC DDR3 1333MHz LP RDIMM (49Y1435) - x3400M3,x3500M3,x3550M3,x3650M3,x3620M3

IBM eServer x336, 1x Intel Xeon 3,2GHz, 512MB DDR, 1x 36,4GB, RAID

2GB (2x 1GB) PC2-6400 CL6 ECC 800 MHz DIMM (46C7428)

4GB PC3-10600 (1x 4GB) Dual Rank CL9 ECC DDR3 1333MHz Chipkill LP RDIMM (44T1483)

IBM 8GB (1x8GB, 2Rx4, 1.5V) PC3-10600 CL9 ECC DDR3 1333MHz LP RDIMM (49Y1436) for x3400M3,x3500M3,x3550M3,x3650M3

ServeRAID M5000 Series Advance Feature Key (46M0930)

IBM eServer x345, 1x Intel Xeon 3,066GHz, 2GB DDR ECC, RAID

The SANblade 2200 Series is based on QLogic's award-winning Fiber Channel architecture and is designed for performance in the Storage Area Network (SAN) environment. The 2200 Series provides all the benefits of Fiber Channel technology - fabric connections for hundreds of devices, bandwidth to 200MB/s (in full duplex) - in a highly integrated cost-effective package.

With PCI, CompactPCI (cPCI), and SBus models, the high-performance 2200 Series supports SAN-enabled features, like F-port fabric login, full duplex, FC-tape and IP protocol, creating a powerful SAN connectivity solution.The SANblade 2200 Series supports key features that are critical to real-world application performance.

The high-speed, on-chip RISC processor and high-level software interface enable the 2200 Series to complete multiple I/O operations without host intervention, creating the lowest CPU utilization of any SAN adapter on the market. The result is the ability to add multiple host adapters with linear performance increases, expanding the reach of your SAN with minimal hardware investment. To further boost performance, QLogic's configuration utility provides tunable parameters for application-specific needs, and the industry-leading Reduced Interrupt Operation (RIO) allows you to significantly reduce CPU interrupts per I/O. The SANblade 2200 Series is designed for maximum functionality in the SAN. Cutting-edge SAN utilities like QLogic SANsurfer Tool Kit provide advanced capabilities for remote configuration and management, load-balancing and persistent binding. Enhanced software drivers include support for SAN-critical features including concurrent SCSI/IP and FC-tape. Plus, QLogic's unique software architecture simplifies integration, with an easy host software migration path between parallel SCSI and Fiber Channel application. The 2200 Series is far more than just hardware - it's a complete I/O solution.

IBM pevný disk 73GB 15K RPM 6Gbps SAS 2.5" SFF Slim-HS HDD (42D0672)

IBM eServer x365, 4x Intel Xeon 2,7GHz, 2048MB DDR, 2x 73,4GB, RAID

IBM eServer x306m, 1x Intel Pentium 4, 3GHz, 2GB DDR2, RAID

The IBM 6Gb SAS HBA is an economical storage enabler to attach RAID-capable external storage enclosures and provide 3 Gbps or 6 Gbps tape storage connectivity for data archiving applications to achieve a higher level of performance.

The PCIe small form-factor IBM 6Gb SAS HBA is based on the LSI SAS2008 controller and can handle medium to large capacity server storage applications by connecting an 8-lane PCI Express adapter with one external x4 SFF-8088 connector and four internal SATA connectors.

The ServeRAID-BR10il SAS/SATA Controller v2 (BR10il v2) offers a low-cost, enterprise-grade RAID solution for internal HDDs and integrates SAS technology into an organization's storage infrastructure. This controller supports RAID levels 0, 1, and 1E.

Intended specifically for the small to medium business (SMB) market, as well as departments of a large enterprise (LE), the solution is ideal for supporting server and workgroup applications where high levels of sustained read and write operations are required.

IBM HDD 500GB 7,2K RPM SATA 2.5" SFF Slim-HS HDD (42D0752)

IBM HDD 500GB 7,2K Hot Swap 3.5" SATA II (39M4530)

IBM HDD 500GB 7,2K RPM Simple Swap 3.5" SATA II (39M4514)

Redundant Power and Cooling Option (44X0381)

This Zero Channel RAID (ZCR) controller performs with new Serial Attached SCSI (SAS) RAID technology. With the onboard 256MB memory and 600MHz Intel processor, ServeRAID 8i takes the RAID processing workload from the CPU and offloads it directly to the controller, allowing your CPU ample bandwidth to perform the application processing required.

ServeRAID 8i SAS Controller  (13N2227) performs with new Serial Attached SCSI (SAS) Raid technology. The ServeRAID 8i is a Zero Channel RAID (ZCR) controller manages your internal data storage in selected xSeries servers. The ServeRAID 8i controller achieves higher performance and up to 10 times higher transfer rates at 3 GB/second than its Ultra-320 SCSI predecessors for a nominal increase in price.

The half-length adapter runs on a dedicated system's PCI-X 64-bit ZCR slot at speeds up to 133 MHz. With the onboard 256Mb memory and 600MHz Intel processor, the ServeRAID 8i takes RAID processing workload and offloads it directly to the controller. This allows your CPU ample bandwidth to perform the application processing required.

ServeRAID 8i SAS Controller offers:

    * RAID levels include 0, 1, 10, 5, 50, 60, and IBM exclusive 1E, and 5EE.
    * Performance up to 3GB/seconds of throughput.
    * ServeRAID 8i supports independent and adjustable stripe sizes of 256k and 512k.
    * Additional ServeRAID features such as Logical Drive Migration, Global Hot Spare, Copyback, and FlashCopy? are available to manage your storage drives.
    * Battery backed memory provides added protection for your valuable data.
    * Rebuild and Rapid Restore? features to preserve RAID configurations.
    * ServeRAID Manager software application is available for managing the SAS RAID array configurations.

The ServeRAID M1015 SAS/SATA Controller for IBM System x is an entry-level 6 Gbps SAS 2.0 PCI Express 2.0 RAID controller. The adapter has two internal mini-SAS connectors to drive up to 32 devices and supports the same base RAID 0, 1, and 10 feature set and drivers as the M5000 series controllers.

IBM pevný disk 146GB 15K RPM 6Gbps SAS 2.5" SFF Slim-HS HDD (42D0677)

IBM HDD 500GB 7,2K RPM 6Gbps NL SAS 2.5" SFF Slim-HS HDD (42D0707)

IBM eServer x306m, 1x Intel Pentium 4, 3GHz, 1GB DDR2, 1x 73,4GB, RAID

IBM HDD 73GB 15K RPM Hot Swap 2,5" SAS (43X0837)

IBM HDD 146GB 15K RPM Hot Swap 3,5" SAS (40K1044) for IBM servers x3200, x3250 , x3400, x3500, x3550, x3650

HDD IBM, Capacity 500 GB, Dual Port HS SATA, 7200 RPM, size 3.5"

IBM ServeRAID M5014 SAS/SATA Controller (46M8029) controller for the IBM System X servers with 256MB cache

IBM eServer x306, 1x Intel Pentium 4, 3GHz, 512 MB DDR, 1x 80GB SATA, RAID

IBM eServer x306, 1x Intel Pentium 4, 3GHz, 512 MB DDR, 1x 80GB SATA, RAID

IBM HDD 300GB 10K RPM 6Gbps SAS 2.5" SFF Slim-HS HDD (42D0637)

Redundant Power Supply Option 675W (46M1075)

IBM HDD 73GB 15K 2.5" SFF non HS SAS (43X0845)

IBM ServeRAID M5015 SAS/SATA Controller (46M8029) - controller for the IBM System X servers with 512MB cache

Procesor Intel Xeon E5506 2.13GHz 800MHz 4MB L2 Cache (49Y6867) for machines  x3400M2 and x3500M2

IBM HDD 750GB 7,2K RPM Hot Swap 3.5" SATA II (43W7576)

IBM HDD 750GB 7,2K RPM Simple Swap 3.5" SATA II (43W7572)

HDD IBM, 7.2krpm 1TB Hot Swap Dual Port SATA II, designed for disk arrays and servers with DS3x00 ServeRAID 8k Controller