Smart-UPS RT 2000VA, Extended Run, Rack Mount

Smart-UPS RT 2000VA, Extended Run, Rack Mount

• Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
• Allows additional run time to be quickly added as needed.
• Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
• Automatically starts up the connected equipment upon the return of utility power.
• Prolongs battery life by regulating the charge voltage according to battery temperature.
• Provides remote management of the UPS over the network.
• Enables centralized management via the APC InfraStruXure Manager.
  Customize UPS capabilities with management cards.
• Quickly understand unit and power status with visual indicators.
• Provides management of the UPS via a serial port.
• Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
• Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
• Install maintenance releases of firmware remotely using FTP.
• Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
• Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Provides early-warning fault analysis ensuring proactive component replacement.
• Warns when a battery is not available to provide backup power.
• Provides notification of changing utility power and UPS conditions.
• Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Minimizes installation costs by enabling the use of smaller generators and cabling.
• Ensures clean, uninterrupted power to protected equipment when generator power is used.
• Provides temporary battery power when the utility power is out.
• Easy recovery from overloads; no need to replace a fuse.
• Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Technical Specification

Output

• Output Power Capacity: 1400 Watts / 2000 VA
• Max Configurable Power: 1400 Watts / 2000 VA
• Nominal Output Voltage: 230V
• Output Voltage Note: Configurable for 220, 230 or 240 nominal output voltage
• Efficiency at Full Load: 90%
• Output Voltage Distortion: Less than 3%
• Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz user adjustable +/- 0.1
• Crest Factor: 3 : 1
• Waveform Type: Sine wave
• Output Connections: (6) IEC 320 C13, (3) IEC Jumpers    
• Bypass: Built-in Bypass

Input

• Nominal Input Voltage: 230V
• Input Frequency: 50/60 Hz +/- 5 Hz (auto sensing)
• Input Connections: IEC-320 C20, Schuko CEE 7 / EU1-16P, British BS1363A    
• Cord Length: 2.44 meters
• Input voltage range for main operations: 160 - 280V
• Input voltage adjustable range for mains operation: 100 - 280V
• Other Input Voltages: 220,240

Batteries & Runtime

• Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Included Battery Modules: 1
• Typical recharge time: 4 hours
• Replacement Battery: RBC31
• RBC™ Quantity:1

Physical

• Height: 85.00 mm
• Width: 432.00 mm
• Depth: 483.00 mm
• Net Weight: 25.00 kg
• Shipping Weight: 29.82 kg